Clock randomness and dummy cables! Normally, the external clock input doesn’t handle fluctuating voltages as trigs. Fear not! You can still use the Gate / CV in to trig your SAPÈL! This works together with the internal clock: if you want total randomness, you can use a dummy cable to block the clock generation and use only the external CV.

 

Visualizza questo post su Instagram

 

Un post condiviso da Frap Tools (@fraptools) in data: 10 Ago 2019 alle ore 11:30 PDT

INGREDIENTS

• 1 SAPÈL
• 1 FALISTRI

DIRECTIONS

1. Set FALISTRI’s green generator to ‘Loop’ mode.
2. Set the green generator’s Time Scale switch to ‘Short’.
3. Set FALISTRI’s yellow generator to ‘Transient’ mode.
4. Set the yellow generator’s Time Scale switch to ‘Long’.
5. Set the yellow generator’s ‘Rise’ knob fully counterclockwise.
6. Set its ‘Fall’ knob roughly around 11 o’clock.
7. Patch the 4QM out to your favorite output section.
8. Patch SAPÈL’s green S&H output to FALISTRI’s green V/oct input.
9. Patch SAPÈL’s green main clock output to the yellow generator’s ‘Trig’ input.
10. Patch SAPÈL’s yellow Fluctuating Random CV output to the green Gate / CV input.
    (This will randomly activate the sampling circuit.)
11. Activate the probability distribution and play with different settings.
12. Plug a dummy cable to the green clock input.
    (This will force the internal clock to stop, thus retaining solely the CV S&H.)