This time we had USTA controlled by ONE envelope of the FALISTRI! The attenuated envelope controls the clock speed, while the EOR gate plays and stops the sequence.


Visualizza questo post su Instagram


Un post condiviso da Frap Tools (@fraptools)


  • 1 USTA
  • 1 SAPÈL
  • 1 BRENSO


  1. Set FALISTRI’s yellow generator to Transient and its time scale to Long.
  2. Set FALISTRI’s yellow Rise knob fully counterclockwise.
  3. Patch FALISTRI’s yellow EOR to USTA’s AUX input.
  4. Patch USTA’s yellow attenuverted output to SAPÈL’s Gate/CV Modulation input.
  5. Set SAPÈL’s Gate/CV modulation switch to the right.
  6. Patch SAPÈL’s clock output to USTA’s clock input.
  7. Patch the CV A output of USTA’s Track 1 to BRENSO’s V/oct input.
  8. Patch the gate A output of USTA’s Track 1 to FALISTRI’s Green Trig/Gate input.
  9. Set FALISTRI’s green generator to Hold and its time scale to Long.
  10. Patch FALISTRI’s green unipolar output to your VCA CV input.
  11. Push USTA’s Navigation encoder to enter the Track Menu and set the Clock Source to External.
  12. Compose your sequence.
  13. Push and hold for three seconds the Navigation encoder and enter the Project menu. Scroll until the Aux Target option and set it to Run 4.
    (Now the yellow EOR will play the sequence wen high, and stop and reset it when low. At the same time, the yellow envelope will control SAPÈL’s clock speed.)