The Channel module is the first member of the channel family. Its concept draws from the monophonic channel strip of a classic analog mixing console, to which we added CV over every key parameter: gain, FX sends, pan.
In this way, it can be used both as a professional mixing channel and a creative tool for advanced automations.
Mechanical mute, PFL, and Solo-in-Place complete the feature set suitable both for studio and live performances.
CV over VCA
CV over pan
2 (on ch. 1 and 4)
CV over sends
2 (yellow on ch. 1, green on ch. 4)
FX sends per channel
FX sends circuit
Stereo Post-fader local mix
Solo in place
⌀ 20 mm
⌀ 12 mm
⌀ 12 mm
Mono aux in
2 local mono FX sends
Voltage-Controlled VCA with Saturation
The Channel module features two amplitude controls: an input VCA and a volume fader. The input VCA is voltage-controllable and, if the signal has enough amplitude, it can overdrive the circuit with a creamy, fat saturation. A peak LED tells when the signal is clipping, but don’t fear cranking it up!
An output allows you to take the channel output for parallel processing or multitrack recording. You can choose to work pre-fader (straight after the input VCA) or post-fader (with the main fader affecting the signal’s amplitude).
Two Voltage-Controlled Effect Sends
The yellow and green knobs are two effect sends levels. They can work pre- or post-fader, and they can be voltage-controlled for expressive and creative results.
The Pan knob defines the stereo placement of the sound, which you can voltage-control as well.
The mute button allows you to remove a channel from the group sum with a click. The mute function works over the input VCA, so it will also mute the effect sends.
The Solo-In-Place button lets you prepare a “scene” of channels to be isolated from the other ones, and then recall it through the Safe Solo button on the Group module. It can be seen as a mute group function that allows you to mute all the channels outside the solo scene with a click.
Push the PFL button and rotate the PFL fader on the master module to preview a channel: it’s convenient for tuning your oscillators or checking if everything is ok before bringing whatever sound source into the mix.
You always need at least one group if you plan to incorporate a master module in your setup. It is not possible to connect any channel module directly to a master module.
The CGM is designed to let you connect up to eight channels (C or QSC) to one group (G), but there is no way of connecting the same channels to two or more groups.
Yes, to take advantage of the Master module’s functions (PFL, headphones, final gain stage), you need at least one group.
I want to connect a QSC to my Group module, but the Link cable shipped with the group seems designed for mono Channels. Why? Can I still use it with the QSC?
We designed the group (G) module together with the classic mono channel (C), which is 6HP wide. After the QSC release, we developed a new Link System with wider plugs that allow you to connect more QSCs in a row.
If you need to connect more QSCs, check your local shop for cable availability!
If you just need to connect a QSC, the classic group-to-channel cable works great, too.
If you experience an abnormal panning on the CGM, check your case’s power supply and your system’s overall power consumption. We experienced that the CGM system sometimes has trouble working in a system close to its maximum Ampère output. An unbalanced power supply may cause the audio to be louder on one channel than on the other.
Try staying below 80% of the total amperage or switch to a more powerful PSU to solve this issue.
We don’t sell directly. Please check our Reseller List to choose your favorite shop!
In Europe, we sell exclusively through our distributor: we do not have access to the individual shops’ orders or stocks.
In the rest of the world, we sell directly to the shops, but even in that case, there’s no way for us to know whether the modules that we’re restocking are sold, available, or reserved for another customer.
We restock every module at least once over a year: we focus on a module’s batch at a time, then we move on to the next one, and so on.
If you want an estimated delivery time for a specific module, drop us a line! We’ll be happy to answer you.
The Mute button closes the first VCA of the channel, thus preventing the sound from being routed through all the other VCAs (FX sends, pan, main fader).
The Solo in Place button isolates some channels and mutes the others. However, the mute function it performs is different since it affects the channel after the fader: the sound will still be routed to any pre-fader VCA such as Direct Output and FX Sends (when set to Pre-Fader Mode).
In other words, the Mute button works pre-fader, while the Solo in Place works post-fader.